Hydra-Cell Seal-less Pumps. Positive Displacement Pumps with a seal-less pumping chamber so there are no seals, packing or cups to leak or replace. The seal-less design and check valves enable Hydra-Cell to handle abrasives and particulates that would damage other types of pumps. In addition, Hydra-Cell Seal-less Pumps can run dry indefinitely without damage to the pump.
The multiple-diaphragm design of Hydra-Cell provides virtually pulse-less, linear flow without the need for expensive pulsation dampeners.
 |
 |
 |
|---|---|---|
| D10 Pump Series – Learn More | D35 Pump Series – Learn More | H25 Pump Series – Learn More |
|
Max Flow: 8.8 gpm Metallic Pump Heads Non-Metallic Pump Heads |
Max Flow: 36.5 gpm Metallic Pump Heads |
Max Flow: 20 gpm Metallic Pump Heads Non-Metallic Pump Heads |
 |
||
| M03 Pump Series – Learn More | ||
|
Max Flow: 3.1 gpm Metallic Pump Heads Non-Metallic Pump Heads |
The graph above displays the maximum flow capacity at a given pressure for each model series. The table below lists the maximum flow capacity and maximum pressure capability of each model series.
Please Note: Some models do not achieve maximum flow at maximum pressure. Refer to the individual model specifications in this section for precise flow and pressure capabilities by specific pump configuration.
| Model | Maximum Capacity gpm (l/min) |
Maximum Discharge Pressure psi (bar) |
Maximum Operating Temperature ºF (ºC)** |
Maximum Inlet Pressure psi (bar) |
||
|---|---|---|---|---|---|---|
| Non-Metallic* | Metallic | Non-Metallic | Metallic | |||
| M03 | 3.1 (11.7) | 350 (24) | 1200 (83) | 140º (60º) | 250º (121º) | 250 (17) |
| D10 | 8.8 (33.4) | 350 (24) | 1500 (103) | 140º (60º) | 250º (121º) | 250 (17) |
| H25 | 20.0 (75.9) | 350 (24) | 1000 (69) | 140º (60º) | 250º (121º) | 250 (17) |
| D35 | 36.5 (138) | N/A | 1500 (103) | N/A | 250º (121º) | 500 (34) |
** Consult factory for correct component selection for temperatures from 160 ̊F (71 ̊C) to 250 ̊F (121 ̊C).
 |
 |
 |
|---|---|---|
| T100 Pump Series – Low Pressure | T100 Pump Series – Medium Pressure | T100 Pump Series – High Pressure |
| Max Flow: 96 gpm
Metallic Pump Heads |
Max Flow: 45 gpm
Metallic Pump Heads |
Max Flow: 26 gpm
Metallic Pump Heads |
The graph above displays the maximum flow capacity at a given pressure for each model series. The table below lists the maximum flow capacity and maximum pressure capability of each model series.
Please Note: Some models do not achieve maximum flow at maximum pressure. Refer to the individual model specifications in this section for precise flow and pressure capabilities by specific pump configuration.
| Maximum Capacity gpm (l/min) |
Maximum Discharge Pressure psi (bar) |
Maximum Inlet Pressure psi (bar) |
Maximum Operating Temperature * F (C) |
|
|---|---|---|---|---|
| T100E | 96.0 (366.1) | 1500 (103) | 500 (34) | 180 ̊ (82 ̊ ) |
| T100F | 76.5 (289.6) | 1850 (128) | 500 (34) | 180 ̊ (82 ̊ ) |
| T100H | 68.0 (257.8) | 2100 (145) | 500 (34) | 180 ̊ (82 ̊ ) |
| T100K | 45.0 (170.4) | 3000 (207) | 500 (34) | 180 ̊ (82 ̊ ) |
| T100M | 38.0 (143.8) | 3500 (241) | 500 (34) | 180 ̊ (82 ̊ ) |
| T100S | 26.0 (98.4) | 5000 (345) | 500 (34) | 180 ̊ (82 ̊ ) |
* Consult factory for correct component selection for temperatures above 180 ̊ F (82 ̊ C) or below 40 ̊ F (4 ̊ C)
 |
 |
|---|---|
| Q155 Pump Series Low Pressure |
Q155 Pump Series Medium Pressure |
|
Max Flow: 195 gpm |
Max Flow: 78 gpm Max Pressure: 3500 psi (241 bar) |
The graph above displays the maximum flow capacity at a given pressure for each model series. The table below lists the maximum flow capacity and maximum pressure capability of each model series.
Please Note: Some models do not achieve maximum flow at maximum pressure. Refer to the individual model specifications in this section for precise flow and pressure capabilities by specific pump configuration.
| Maximum Capacity gpm (l/min) |
Maximum Discharge Pressure psi (bar) |
Maximum Inlet Pressure psi (bar) |
Maximum Operating Temperature * F (C) |
|
|---|---|---|---|---|
| Q155E | 157 (595) | 1500 (103) | 500 (34) | 180 ̊ (82 ̊ ) |
| Q155F | 127 (490) | 1850 (127) | 500 (34) | 180 ̊ (82 ̊ ) |
| Q155H | 111 (421) | 2100 (144) | 500 (34) | 180 ̊ (82 ̊ ) |
| Q155K | 78 (295) | 3000 (207) | 500 (34) | 180 ̊ (82 ̊ ) |
| Q155M | 67 (252) | 3500 (241) | 500 (34) | 180 ̊ (82 ̊ ) |
Capable
- Hydra-Cell Seal-less pumps can deal with abrasive liquids
- Tolerates abrasive solids and particulate matter up to 800 microns (depending on pump model) and 9 hardness (Mohs) without the need for fine filtration.
- Multiple diaphragms provide virtually pulse-less flow that exceeds API 675 standards for accuracy, linearity, and repeatability.
- Low-shear pumping action ensures integrity of long-chain structures.
Environmental
- Hydra-Cell Seal-less pumps are environmentally friendly
- Liquids are 100% sealed from the atmosphere.
- No leak path for toxic vapors or harmful gasses.
- No seals to leak any Volatile Organic Compounds (VOC).
- Lower energy costs to operate pump.
Versatile
- Versatility of Hydra-Cell Seal-less pumps is unmatched
- Variety of styles and models to pump a wide range of flow capacities and pressure ratings.
- Hydraulically-balanced diaphragms can pump low-to-high- viscosity liquids throughout the entire pressure range of the pump.
- Available in a variety of construction materials to meet a wide range of applications and ensure optimum pumping life even when handling aggressive fluids.
- Can be fitted with SAE, ANSI or DIN flanges as well as IEC or NEMA motor mounts.
- Can be provided with ATEX certification or other certification to adapt to specific applications or meet international standards.
- Design allows for easy interchangeability of pump head materials and can accommodate mixing different materials with one pump head.
Reliable
- Hydra-Cell Seal-less pumps are most reliable
- Can run dry without damage to the pump.
- Robust design tolerates non-ideal operating conditions.
- No seals, packing or cups to leak or replace.
- Typically runs up to 6,000 hours between lubricating oil changes.
- Can pump acids, slurries and liquids containing up to 40% of non-dissolved solids.
- Does not rely on the fluid being pumped for lubrication.
- No tight tolerances susceptible to corrosion or solid particles.
