PULSAPRO Series Pumps from John Brooks Company

PULSAPRO Metering Pumps meet all API 675 specifications – without exception. Hydraulic Diaphragm Metering Pumps – are positive displacement, reciprocating metering pumps that combine the high efficiency of a plunger pump with the sturdiness of a diaphragm seal to eliminate leakage. They provide maximum accuracy and repeatability with the dependability of a 5-year drive train warranty. Available in a wide range of materials and diaphragm designs, these pumps offer a diverse range of fluid handling solutions. This series of pumps builds from its legendary predecessor, Pulsa Series, with expanded performance, improved robustness, and new features to simplify operation and maintenance.

Flows: up to 270 gph (1,022 lph)

Pressures: up to 5,100 psi (350 bar)

Temperature: up to 275°F (135°C)

Viscosity: up to 1,000 cPs

The API 675 specification identifies requirements for reciprocating metering pumps used in the petroleum, petrochemical and gas industry services. It provides a framework for pump manufacturers and purchasers to agree on the design, fabrication and testing of a metering pump.

Since 2014, a number of exceptions and waivers have been allowed to this specification – for items such as studs, fasteners, flanges, relief valve settings, external parts, bolting materials, flexible couplings, baseplates and other ancillary items. A variety of clarifications stipulate how flow & pressure tests should be performed, and additional stipulations define how documentation should be provided. Pulsafeeder’s PulsaPro metering pumps – which are widely used in refineries and petrochemical plants – address all of the stipulations without exception.

Why is it important to adhere to API 675 standards without exception?

The API 675 Spec serves many masters and allows customers to address exceptions in numerous ways. The most important question that end-customers should ask is: “Who makes the decision for how exceptions will be met?” Does the end user make the call? Or are these decisions being made for them, by OEMs or EPCs?

Although oil & gas markets have recovered from the most recent downturn, CAPEX budgets (in many cases) have not returned to their previous levels. This has placed cost pressures on almost every new project. In an effort to save money, some OEMs and EPCs might view API 675 requirements through a less-stringent lens. By looking past every waiver or exception, some integrators might take a short-term-view, and seek up-front cost reductions by using less expensive and less robust pump designs (such as Mechanically Actuated Diaphragm or peristaltic pumps) for applications like industrial water treatment.

While these less expensive pumps may offer initial cost savings, they are not designed to run for 20, or 30 years the way fully-compliant API 675 Hydraulically Actuated Diaphragm (HAD) pumps are. More importantly, they cannot match the reliability and the safety provided by a double-diaphragm, HAD design with leak detection capabilities.


PULSAPRO 680	PULSAPRO 880	PULSAPRO 7120

PULSAPRO 900

Pulsapro Product Specifications:

Steady state accuracy of +/-0.5% of set point
Repeatability of +/-0.5% of rated capacity
Linearity of +/-0.5% of rated capacity
Full motion stroke length control mechanism
Manual stroke length capacity control with 100:1 turndown
Fluid temperatures from -10 to 275°F (-23 to 135°C)
Net Positive Inlet Pressure (NPIP) required: 3 psi (0.2 bar)
Compliant to API-675, CE and ATEX standards
Diaphragm types: flat, double diaphragm with pressure leak detection, HYDRAtube or HYDRAcone
Modular configurations: simplex, duplex, triplex and multiplex up to 17 pumps
4-bolt tie bar
Connection types: NPT, BSPT, raised-face flange
Motor frames: 56C, 143/145TC, 182/184TC, IEC71, IEC80, IEC90

Pulsapro Materials of Construction:

Wet End: 316LSS, PVC, GF-PPL, GF-PTFE, Alloy C, Monel®, DuplexSS, PVDF, Titanium
Flat Diaphragm: PTFE, Metallic
HYDRAtube Diaphragm: FKM, CSM, PFA
HYDRAcone Diaphragm: FKM, CSM
Pump Body: Cast Iron
Pump Base: Steel, Stainless Steel