T Series® self-priming centrifugal pumps are the standard for industrial and sewage applications. The heavy duty construction and easy-to-service design have made Gorman-Rupp T Series pumps the standard in the industry. The combination of different sized pumps, impeller trims and speed variations ensure that the correct capacity pump will be matched to the exact requirements of your system, whether it’s a small sub-division or a large waste collection system. These pumps feature a large volute design that allows them to reprime automatically in a completely open system without the need for suction or discharge check valves – and they can do it with the pump casing only partially filled with liquid and a completely dry suction line.
Features:
- Solids Handling Impeller: Two-vane, semi-open, solids handling impeller handles up to 3″ (76 mm) diameter solids, depending on pump model. Pump out vanes on impeller shroud reduce foreign material buildup behind impeller and reduce pressure on seal and bearings for extended pump life.
- Exclusive Abrasion-Resistant Seal: Exclusive double-floating, self-aligning oil lubricated mechanical cartridge seal with stationary and rotating face of silicon carbide is specifically designed for abrasive industrial wastewater service.
- Removable Cover Plate: Removable cover plate provides quick and easy access to pump interior without disconnecting piping. Clogs can be removed and pump returned to service in minutes. Impeller, seal, wear-plate and flap valve can also be accessed through cover plate opening for inspection or service.
- Replaceable Wear-plate: T-Series pumps feature replaceable wear-plates which fasten to the cover plate and can easily be removed for inspection or service. No expensive castings to replace.
- Removable Rotating Assembly: Removal of rotating assembly allows easy inspection of pump shaft or bearings without disturbing pump casing or piping. On most models, simply remove four bolts from the back of the pump and the rotating assembly slides out.
- Drive Variations: T-Series Pumps are available as basic units for connection to customers’ power source or may be flex-coupled or V-belt driven by an electric motor. Pumps may also be powered by gasoline or diesel engines. Electric motor driven pumps with “standby” engine power are also available.
Specifications:
| Size | 2″ (50 mm), 3″ (80 mm), 4″ (100 mm), 6″ (150 mm), 8″ (200 mm), 10″ (250 mm) |
|---|---|
| Max Capacity | 3400 GPM (215 lps) |
| Max Head | 130′ (40 m) |
| Max Solids | 3″ (76 mm) |
| Max Temperature | 160 F (71 C) |
| Materials of Construction | Cast Iron, CD4MCu, Stainless Steel |
Models:
| Model | Size | Casing | Impeller | Rotor | Drive | Flange | Seal |
| T2A3-B | 2 x 2 | Cast Iron | Ductile Iron | Basic | NPT | Tungsten Carbide |
| T2A3-B/F | 2 x 2 | Cast Iron | Ductile Iron | Basic | ANSI Spool | Tungsten Carbide |
| T2A60-B | 2 x 2 | Cast Iron | Ductile Iron | Basic | NPT | Silicon Carbide |
| T2A60-B/F | 2 x 2 | Cast Iron | Ductile Iron | Basic | ANSI Spool | Silicon Carbide |
| T2A61-B | 2 x 2 | Cast Iron | Stainless Steel | Basic | NPT | Silicon Carbide |
| T2A61-B/F | 2 x 2 | Cast Iron | Stainless Steel | Basic | ANSI Spool | Silicon Carbide |
| T2A65-B | 2 x 2 | CD4MCu | CD4MCu | Basic | NPT | Silicon Carbide |
| T2A65-B/F | 2 x 2 | CD4MCu | CD4MCu | Basic | ANSI Spool | Silicon Carbide |
| T2A71-B | 2 x 2 | Cast Iron | ADI | Basic | NPT | Silicon Carbide |
| T2A71-B/F | 2 x 2 | Cast Iron | ADI | Basic | ANSI Spool | Silicon Carbide |
