EATON DCF 800 Mechanically Cleaned Filters are ideal for highly viscous, abrasive, or sticky liquids. Eaton DCF 800 mechanically cleaned filters operate at a consistently low differential pressure and deliver simple, reliable operation in which a low initial investment is a key driving factor.
EATON DCF 800 Feature Comparison Chart
| FEATURES | DCF-400 | DCF-800 | DCF-1600 |
|---|---|---|---|
| Single Unit Weight | 35 lbs | 16 kg | 75 lbs | 34 kg | 215 lbs | 97.5 kg |
| Service Height | 61.25 in | 1556 mm | 69.25 in | 1760 mm | 102 in | 2591 mm |
| Total Volumetric Capacity | 0.94 gal | 3.5 liters | 3.9 gal | 14.8 liters | 11 gal | 41.6 liters |
| Purge Chamber Capacity | 4 fl. oz | 119 ml | 25 fl. oz | 0.74 liters | 1.5 gal | 6 liters |
| Filtration Surface Area | 112 in² | 722 cm² | 264 in² | 1703 cm² | 610 in² | 3935 cm² |
| Flow Rate Range at 100μ | 2–20 gpm | 0.45–4.5 m3/hr | 20–60 gpm | 4.5–13.6 m3/hr | 60–200 gpm | 13.6–45.4 m3/hr |
| Maximum Temperature* | 350˚ F | 177˚ C | 350˚ F | 177˚ C | 350˚ F | (177˚ C |
| Maximum Pressure | 300 psi | 21 bar | 150 psi (10.5 bar) standard | 150 psi (10.5 bar) standard |
| Service Requirements Minimum Air for Actuator Drive |
60 psi at 5 cfm | 4 bar @ 8.5 m3/min | 60 psi at 5 cfm | 4 bar @ 8.5 m3/min | 80 psi at 5 cfm | 5 bar @ 8.5 m3/min |
| Electrical for Controllers | Automated only Models – 110/220V, 50/60 Hz, single phase | ||
* Dependent on elastomer seal selection.
Features of EATON DCF 800 Mechanically Cleaned Filters
- Automation Minimizes Disposable Waste and Labor Costs
- Elimination or reduction in disposable filter bags and cartridges for reduced operator handling inventory costs and landfill waste
- Reduction in product loss, more thorough contaminant purge in a highly concentrated waste stream
- Virtually maintenance free, near 100% uptime
- Compact design, lower capital cost to fit most installations
- Stainless steel screens from 15 micron slots to 1/4″ perforations to handle a wide range of filtration needs
- Available with UHMWPE, Urethane-, Teflon, or Kynar-Cleaning Discs
The DCF is the best self-cleaning filtration solution for minimizing product loss in high-value and/or high viscosity fluids.
When processing water and water-like liquids where a low initial investment is demanded, DCF single actuator models deliver tremendous benefits. Available in 400, 800, and 1600 sizes, The DCF-Series enables operation at a vast range of flow rates and retentions.
The DCF-800 and DCF-1600 are also available in twin actuator models, which are designed for the rigors of processing highly viscous, abrasive, sticky, or otherwise hard-to-process liquids. DCF Filters are suitable for a broad spectrum of challenging applications and accommodate a wide range of flow and retention requirements.
A unique circular cleaning disc design (MCF) ensures intimate contact with the screen to thoroughly and uniformly clean the media.
Markets Served:
- Chemicals
- Ethanol
- Food and Beverage
- Manufacturing
- Oil and Gas
- Pulp and Paper
- PetroChem
- Pharmaceuticals
- Water
Typical Applications
- Adhesives
- Chocolate
- CIP Fluids (Sodium Hydroxide)
- Curtain Coaters
- Detergents
- Edible Oils
- Ethanol Processing
- Hot Fry Oils
- Ink
- Lime Slurries
- Machining Coolants
- Nutricuticals
- PCC/GCC Slurries
- Paint
- Paper Coatings
- Petroleum Based Greases
- Phenolic Resins
- Starch
- Tallow
