EATON AFR Series Tubular Backwashing Filters

EATON AFR Series tubular backwashing filters features a unique, expandable circular design for increased capacity in a compact one-square-meter footprint. The Eaton AFR Series uses Ronningen-Petter technology for ideal for high volume, low viscosity applications with retentions as low as 2 microns.

EATON AFR High Performance & High Volume

Increased capacity and space saving:

• Solids removal from 1 to 1,700 microns
• Flow rates up to 2,000 gpm (454 m³/hr)
• Broad selection of filter media materials and retentions suitable for a wide range of applications
• Numerous automated backwash options for operator-free service and minimal backwash effluent (<2% of system volume)
• Smooth pipe and nozzle connection transitions to avoid dead spots in the fluid stream and minimize pressure drop
• Isolated top-to-bottom backwash flow for complete and efficient media cleaning while continuing to deliver filtered product downstream
• Available ACCUFLUX™ media dramatically increases filter surface area in the same footprint
• Configured with an array of up to eight – 4″ (101.8mm) or 6″; (152.4 mm) body tubes surrounding a central cleaning valve

Options:

• Media-cleaning diffusers for more effective cleaning with low operating pressures or volumes
• Drain header trap
• Isolation butterfly valves for individual body tube removal while filter is in operation
• Hinge-lock quick couplings
• 304 stainless steel frame material

Cost reduction:

• A single AFR Series filter can replace a 13- station multiplexed system.
• For even higher flow rates, AFR Series filters can be easily combined.

Specifications:

• Connection Inlet and Outlet: 8” ANSI or 200 mm DIN flanged. Drain: 3”(80 mm) weld stub
• Process Parameters Temperature: 300°F (149°C) maximum (determined by screen material and elastomer seals). Operating pressure: up to 250 psi (17 bar)
• Elastomer Seals Standard: Buna-N (180°F (82°C) max). Optional: Nordel (230°F (110°C) max); Viton® (300°F (149°C) max)
• Housing/ Wetted Parts Materials Standard: 316 stainless steel. Optional: Wide range available; consult Eaton
• Frame Material Standard: Painted carbon steel. Optional: 304 stainless steel
• Automation Standard: Choice of programmable logic controller (PLC) or semi-automatic. Optional: Wide range available; call 1-877-624-5757 for more information
• Utilities Electrical: 110 or 220 Volt, 50 or 60 Hz, single-phase. Air: 60-120 psi (4.1-8.3 bar) @ 5 cfm. Air must be clean, dry and non-lubricated

Applications of Eaton AFR Series Tubular Backwashing Pressure Filter:

• Chemical Filtration
• Food and Beverage Filtration
• Manufacturing Process Filtration
• Oil and Gas Refining
• Petrochemical Processing
• Wastewater Treatment
• Water Treatment
• Pre-RO Filtration
• Seal Protection
• Heat Exchanger Protection