Bete P Spray Nozzle – Evaporative Cooling, Fogging, and Misting Nozzles
By using nozzles with very small orifices, a fine droplet size can be attained even at relatively low pressures. Misting nozzles utilize two main technologies; the first is the use of an impingement pin to achieve atomization, the second uses a very small whirl to achieve atomization. When used at higher pressures, direct pressure misting nozzles produce a droplet size that rivals air atomizing nozzles. The Bete P spray nozzle uses liquid “impinges” on pin for extra-fine atomization.
Design Features of the Bete P Spray Nozzle:
– High energy efficiency
– One-piece construction
– No whirl vanes or internal parts
– Highly efficient laminar jet impinges on target pin generating fine fog
– Male connection
Spray Characteristics of the Bete P Spray Nozzle:
– Finest fog of any direct pressure nozzle
– Produces high percentage of droplets in the 25-400 micron range; ideal for dust suppression
Spray pattern: Cone-shaped Fog
Spray angles: 90°. For best 90° pattern, operate nozzle at or above 60 psi (4 bar)
Flow rates: 0.034 to 7.68 gpm (0.153 to 30.3 L/min)
Spray Angle Visual and Drawings:
