Bete XASR Spray Nozzle : Air Atomizing and Siphon Fed Round Full Cone Nozzle
John Brooks Company carries a complete range of two-fluid (typically compressed air & water) atomizing Bete nozzles. The Bete XASR spray nozzle is part of the Bete XA nozzle system. It uses the energy in compressed air to produce highly atomized sprays at low flow rates. There are many interchangeable parts that can be assembled to achieve a variety of spraying objective. The XA nozzles produce eight distinctly different types of sprays, depending on which interchangeable air and fluid caps are selected.
Design Features of the Bete XASR Spray Nozzle:
– Lowest flow available
– Very fine atomization
– Narrow spray angle (12° to 22°)
– Full cone pattern
– Short to moderate forward spray projection
Applications for Bete XASR Spray Nozzles:
– Air Atomizing
– Air Conditioning
– Coating
– Concrete Curing
– Cooling: Evaporative
– Fogging
– Humidification (humidify air in ducts, drying kilns, curing rooms, greenhouses, and other open areas.)
– Lubrication (lubricate dies and moulds, roll bite in strip mills)
– Misting
– Moistening
– Odor Control
– Scrubbing: Conditioning (inject ammonia or water upstream of electrostatic precipitators; inject odor control additives)
– Scrubbing: Dry (inject lime slurry into dry scrubber)
The photo on this page represents only one of the configurations available. Please contact us for more information.
