Bete WL Whirl Nozzle : Low Flow/Full Cone
The Bete whirl nozzles provide uniform distribution of relatively large droplets. Tangential or axial whirl nozzles feature an internal vane within the nozzle body which causes the liquid to “whirl”. The Bete WL Whirl Nozzle is an axial full cone whirl nozzle. With this design of full cone nozzle the fluid is set into a whirl motion by an internal vein or whirl chamber. The resulting turbulence breaks up the liquid into droplets which are then shaped in to a full cone pattern as they exit the orifice.
Design Features of the Bete WL Whirl Nozzle:
– Advanced whirl plate design produces uniform coverage
– Male and female connections
Spray Characteristics of the Bete WL Whirl Nozzle:
– Medium to coarse atomization
Spray pattern: Full Cone. Square pattern available
Spray angles: 30°, 60°, 90° and 120° standard
Flow rates: 0.13 to 59 gpm (0.497 to 192 L/min)
Standard Materials: Brass, 303 Stainless Steel, 316 Stainless Steel, PVC, Polypropylene, and PTFE (1/8″ PTFE and Polypropylene not available in 120°) .
Applications of the Bete WL Whirl Nozzle:
– Cooling: Deluge
– Cooling: Parts
– Distribution
– Etching: Electronics
– Foam Control
– Mist Eliminator Wash
– Packing
– Washing: Intermittent
– Washing: Parts
